Skip to content

carboy-rinse-station

CLEAN YOUR MIX TANKS, VESSELS, DRUMS AND CONTAINERS

This ergonomic and affordable carboy cleaning and rinsing system is available from WMProcess to improve COP clean out of place for smaller scale tanks and containers. These are very effective for poly tanks used in biopharma and laboratories for Buffer prep and salt solution makeup.   WMProcess carboy rinse station is compact and effectively COPs various size drums, carboys and containers – the WMP-COP/CRS-50SAN handles up to 50gal tanks

CLICK HERE FOR BROCHURE (PDF)

P/N WMP-COP/CRS-50SAN
30” dia x 60” tall, bottom drain 18” off floor

Standard unit includes poly housing as shown in photo, spray nozzle, platform for setting carboy into place and inlet port for rinse solution and outlet port on self-draining cone bottom.

Custom Units Available

carboy-rinse-3

Who We've Worked With

top-entry-high-shear-mixer

Model HSM-Top entry
Sanitary Duty, 32Ra polished 316ss shaft and mixing head
TEFC inverter duty motors, plate or flange mount for open tank mixing

**2000-5000gal + please contact us

OPTIONS

  • mixer speed controller
  • mixing tank, poly or stainless
  • sealed mixer design for pressure or vacuum in mix tank
  • multimotion agitation / multishaft mixing
  • biopharma designs

WMProcess Top Entry Shear Mixers provide high speed, and high shear vigorous mixing action. This style of mixer is used to dissolve difficult to wet out powders and gums into liquids, which require a shearing action to dissolve lumps, fish eyes, and break up clumps.

The mixer is a sanitary top entry style mixer, with a stainless steel mount and oversized bearings for maximum mixer durability. High shear mixers can be packaged with a mixing vessel, or combined with anchor style sweep agitators for more complex blending situation. Multiple high shear blades and mixing heads are available depending on the application, including squirrel cage and high shear disperser blades.

TYPICAL HIGH SHEAR MIXER APPLICATIONS, for single shaft high shear tank mixer:

  • High shear mixing for viscosities up to 15,000 cps (consult factory for higher viscosities)
  • Blending and dissolving of difficult-to-wet solids and powders into liquids
  • Break up clumping powders, fish eyes, and lumps
  • Typical mixer operating speed: 1750rpm, 3600rpm, and 10:1 turndown ratios with mixer speed controller

Typical Products mixed with high shear agitation:

  • Purees and smoothies
  • Dispersions and emulsions
  • Gels and creams

Who We've Worked With