White Mountain Process Repair
How we repair a mixer or agitator:
- Determine scope of repair required, and weight/size of equipment to figure out best path forward to optimize the service
- We determine why the mixer component failed, and what options are available to repair. We make suggestions that will lead to increased agitator service life.
- All mixer and seal components are completely cleaned, measured, evaluated, and inspected by the engineering department to determine which parts can be re-used.
- Seal faces can typically be re-used and are lapped to 2 light bands which is industry standard.
- Motors can often be rewound and tested
- Shaft will typically be checked for runout and balance
- Seal materials can be upgraded as needed depending upon an engineered review of the seal application or by customer request. We offer any available seal faces, and can make suggestions based on your process details. GRAS and sanitary faces available.
- After final assembly are inspected and if possible tested.
- All mechanical seals we repair in our facility are tested.
- If FDA or USP VI elastomers are required on the job certification is provided
- Certs are included for any Polishing and electropolishing of wetted parts or seal debris wells
- We repair and service motors, mechanical seals, gearboxes, shafts, impellers, and mounting plates/pedestals for agitators, mixers, blenders, reactors, centrifuges, blowers, compressors and just about any rotating equipment.
SAVE MONEY AND TIME, contact us for your agitator service repair