Straight Tank Height in Inches (required, 2 decimals max)
Cone Angle From Floor (required, 2 decimals max)
Enter a value between 0 and 90. Cone is more common on poly tanks, if no cone enter 0.
Tank Volume
| Tank Type | Bottom | Top | Total Tank Height (inches) | Gallons | Liters |
| Cylindrical | Flat | Flat | 0.00 | 0.00 | 0.00 |
| Cylindrical | Hemispherical | Flat | 0.00 | 0.00 | 0.00 |
| Cylindrical | Hemispherical | Hemispherical | 0.00 | 0.00 | 0.00 |
| Cylindrical | A.S.M.E. | Flat | 0.00 | 0.00 | 0.00 |
| Cylindrical | A.S.M.E. | A.S.M.E. | 0.00 | 0.00 | 0.00 |
| Cylindrical | Conical | Flat | 0.00 | 0.00 | 0.00 |
| Square | Flat | Flat | 0.00 | 0.00 | 0.00 |
Straight Section Volume Per Inch
Cylindrical (gal/inch) =
Square (gal/inch) =
Mixtank volume calculator is a guide and reference tool only, end user should double check all calculations for accuracy.
LIQUID WEIGHT CONVERSION: for weight of fluid take GAL x 8.34 x sg (water is 1.0) = weight in lbs
| Flat Bottom Cylinder | ASME Dish Bottom Cylinder | Cone Bottom Cylinder | Hemispheric Bottom Cylinder | Flat Bottom Square |
 |
 |
 |
 |
 |
