Pump Seal Repair and Service

Pump seal repair and service

Reduce cost by 50% on mechanical seal repair!
FAST and responsive seal service and repair!

Call us for repair, refurbish, retrofit, lapping, or service on your pump mechanical seal. We specialize in pump, agitator, mixer, blender, reactor, and blender mechanical seal repair and retrofit.

Please contact us at sales@wmprocess.com

We supply new mechanical seals, or can repair anyone else’s seal. We provide service and troubleshooting for mechanical seal problems. Our pump seal offering includes:
• New pump mechanical seals• Sanitary and hygienic pump mechanical seal options
• Pump seal repair, troubleshooting, and optimization
• Pump lip seals, packing, orings
• FAST PUMP SEAL REPAIR TURNAROUND
• FDA pump lip seals and USP VI pump elastomers

Mechanical seal repair for seals from any seal manufacturer or pump supplier is available, and not limited to Flowserve, John Crane, Chesterton, AES, Delta, Flex-A-Seal, Burgmann, Utex and any others..
- We try to help you find out the root cause of the pump seal failure. A failure analysis is performed on every pump seal to determine why the it failed. We want to help you increase uptime and make it easier to maintain the seal going forward.
- Seal components are cleaned, measured, pressure tested, and inspected by to determine which parts can be re-used, or refurbished.
- Seal faces are lapped in a controlled lapping room.
- Seal materials can be upgraded as needed, we will make suggestions if we can reduce costs on the seal or improve reliability and performance by using alternate seal faces or elastomers.
- All seals are inspected and packaged safely.
- All mechanical seals that are repaired by us are pressure tested and provided with certs
What WMProcess does different with pump seal repair:
a. We will save you money and provide the fast seal turnaround
b. we provide options for you to decide the best approach:

  • seal repair
  • refurbish
  • retrofit
  • or a new seal, possibly with optimized seal faces and elastomers if applicable

    • We will work with you to optimize the seal repair for economy and long life
    c. we will not push you to buy complete new seals, we supply seal kits to save money
    d. pump seal troubleshooting is available to you, our goal is to help you find the root cause of seal failure
    e. quick response, quick repairs on seals, and the absolute best seal repair pricing

    Agitator, mixer, reactor mechanical seal

    - Our mixer and agitator expertise allows us to cost effectively repair complex mechanical seals used on mixers, agitators, stirred tank reactors, centrifuges, compressors. Don’t send these seals to the OEM’s and pay too much and wait days and weeks for repair, give us an opportunity to help.
    - Some of the most common manufacturers of equipment requiring specialty seal repair include, Lightnin, Pfaudler, Philadelphia, Chemineer, Sharpe, Brawn, Indco, Greerco, EMI Cleveland, Silverson, Admix, Ekato, Ika, and any others.

    Seal lapping service

    – We can lap seal components of all shapes and sizes
    - We provide lapping services for any pump seal faces or pump parts

    OEM Seal Replacement

    - We can provide you with a replacement seal at a fraction of the cost of OEM SEALS, and with the properly selected materials to give you the best possible seal life.
    - Simply send us with a working seal sample along with all of the application data, and we will give you a quote to replace it.
    We can make suggestions on how to modify the seal to make it easier to install, clean, repair, AND REDUCE YOUR COST.

    SEAL INSTALLATION CHECKLIST
    Is the seal in good condition, and clean
    Are the springs in proper position
    Is the shaft clean, without any scoring or nicks or burrs
    Is the shaft runout ok
    Did you lubricate the seal orings per instructions
    Please call us for any seal installation help

    Other products we offer in addition to New Pump Seals and Mechanical Seal Repair service:

    SEAL REPAIR KITS
    Seal repair kits, or just replacement seal faces. Seal face material in Tungsten Carbide, Silicon Carbide, Carbon, GRAS carbon, food grade carbon, Ceramic, high purity ceramic, Hardened Steel, and other materials.

    LIP SEALS
    O’ring groove seals
    ‘L’ shape
    ‘T’ clamp style
    Block style
    Any insert shape and size
    Special configurations can be made
    USP VI and FDA elastomers

    O’rings and Elastomers

    O’rings in any available material and sizes (Viton, ChemrazTM ,KalrezTM , Buna, EPR, Aflas, Teflon Jacketed Viton), PTFE, and we specialize in USP VI and FDA elastomers and oring. Grafoil shaft and seat packing for high temp applications. FDA PTFE packing for sanitary applications.

    PUMP PACKING
    Packing for pumps and mixer stuffing boxes, PTFE available for sanitary applications.

    For any pump seal repair requirements please do not hesitate to contact us.

    sales@wmprocess.com
    Pump Mechanical Seal
    Pump Seal Repair and Service
    We help save you TIME and MONEY on your sealing requirements.