High Shear Lab Mixer

ADMIX’s OPLB-300 Benchtop High Shear Lab Mixer

The OPLB-300 is specifically designed for product development, simulation and scale up. ThIS is the first lab mixer with scale up parameters and indicators built into the PLC controls, providing an accurate and repeatable method of scaling up from 1-2 liters to over 1,000 gallons. Information displayed on the OPLB-300 includes elapsed time, running speed (rpm), flow rate (gpm), tip speed (ft/sec) and mixing intensity.

Call For Pricing

Be sure to check out our Price Guarantee

The BenchMix™ OPLB-300 takes the guesswork out of scaling from smaill to large volumes. Once satisfactory results are obtained with the BenchMix in any volume from 1 liter to 2 gallons of test material, the critical scaling parameters are indicated to proceed to much larger production size volumes.

Specifications
Mixing Head Types Rotosolver® Dispenser, Rotostat® Emulsifier or Low Speed Propellers in various sizes
Output Speed 500-10,000 RPM
Horsepower 1/2 HP maximum rating
Motor Characteristics Permanent Magnet DC Brushless Drive with Hall Sensor for regulation to 1% of set speed
Shaft Size 10mm x 356 mm (3/8" x 14")
Mix Head Diameters 29 mm (1.14") Rotosolver
50 mm (2") Rotostat with lower prop [XP] or without lower prop [X} (optional)
1", 11/2", 2" or 3" Propellers (optional)
Capacity 1 to 12 Liters (1/4 to 3 Gallons)
Weight 55 lbs.
Mixer Stand Glass Beaded 316SS Chassis with removable non-slip ribbed rubber mat
Mixer Lift Push Button Electric Lift, 18" of travel in 27 seconds, mechanical brake and over running clutch. Sealed lift tube.
Dimensions Overall Height: 27.2" - 45.2"
Overall Depth: 19.25"
Overall Width: 14.5"
Controller/Display Closed Loop PLC / 115 Volt / 60 Hz System with digital, 2 line, 20 character alphanumeric display
Output Profiles Ten (10) User Programmable Profiles, each with ten (10) Time, Speed, Delay, Prompt for User and End steps. Pre-programmed for use with eight (8) seperate mix heads.