White Mountain Process » Small Scale Impellers

Anchor Paddle Mix Impeller

admin — Sun, 28 Dec 2008 15:26:20 +0000

Anchor Paddle Stainless Electropolished Mix Impeller

If you find better pricing on any mixing impeller anywhere, send us the link and we will meet or beat it!

Tired of searching for the right lab anchor paddle stirrers?
Want a selection of sanitary lab anchor paddles with electropolished stainless?

White Mountain Process provides the widest range of lab mix impellers on the planet at the best prices. Our specialty is sanitary impellers including polish and electropolish and plastic Teflon mixer assemblies. Contact us for any custom impeller you cannot find on the site at sales@wmprocess.com.

Caframo Stirrers are high quality lab mixers and stirrers and offer a very nice selection of electropolished stainless mixing impellers and PTFE stirrers. Complete lab mixer packages are available which include lab stirrer, impeller, shaft, stand, clamp and any other options you may need.

Anchor Paddle Stirrer Model WMP-U022
Electropolished stainless steel 316L
Welded to shaft
Weight: 0.4 lbs (181 g)
High shear at edges, can be used close to vessel wall
Sometimes referred to as a “sweep”

Applications:
Low speed stirring
High viscosity mixing
Tangential flow pattern

Anchor Paddle Mix Impeller Model WMP-U044
Electro polished stainless steel 316L
Welded to shaft
Weight: 0.6 lbs (280 g)
High shear at edges, can be used close to vessel wall
Sometimes referred to as a “sweep”

Applications:
Low speed stirring and blending
High viscosity mixing and high torque blending
Tangential flow pattern

Stainless mixing Anchor Paddle Model WMP-U055
Electropolished stainless steel 316L
Welded to shaft
Weight: 0.7 lbs (300 g)
High shear at edges, can be used close to vessel wall
Sometimes referred to as a “sweep”

Applications:
Low speed stirring
High viscosity high torque mixing
Tangential flow pattern

Stainless Mixing Anchor Paddle Model WMP-U510
Electropolished stainless steel 316L
Welded to shaft
Weight: 1.6 lbs (716 g)
High shear at edges, can be used close to vessel wall
Sometimes referred to as a “sweep”
Use only with overhead stirrer BDC1850

Applications:
Low speed stirring and blending
High viscosity mixing
Tangential flow pattern

Teflon Anchor Paddle WMP-183

admin — Tue, 09 Dec 2008 18:35:48 +0000

If you are unsure of which impeller is right for you or if you would would like a quote, simply fill out form below.

Your email address must be included for us to properly assist you

You will never be put on any email or mail lists – all information is confidential between you and WMP

Your Name
Your Email
Type of Impeller
Impeller Diameter
Material
Bore (Shaft DIA)
Polish/Finish
Passivate/Electropolish
MTR/Documents RQD
Other/Comments
Quantity

Teflon Plastic Mixing Impeller

admin — Tue, 09 Dec 2008 18:33:35 +0000

Need TEFLON or Plastic Mixing Impellers?
Tired of plastic agitator coating that chip or have pinholes?
Solid plastic and teflon mixing impellers are made to your requirements. Corrosion resistant, light weight, and made to fit your mixing setup. We offer:
• PTFE and PFA mix impeller (Teflon impellers)
• Kynar mix impeller (PVDF mixer)
• Polypropylene mix prop (PP mixer)
• Polyethylene mix impellers(PE mixer)
• Solid plastic impellers, not just a spray coating
• USP VI and FDA mixers with documentation available
Available in FDA and in certain cases USP VI materials. Using a solid stainless shaft to provide stability, and a solid Teflon impeller for chemical resistance and mechanical durability. Size range from 0.50″ diameter PTFE mixer blades to 25″ +.

If you are unsure of which impeller is right for you or if you would would like a quote, simply fill out form below.

Your email address must be included for us to properly assist you

You will never be put on any email or mail lists – all information is confidential between you and WMP

Your Name
Your Email
Type of Impeller
Impeller Diameter
Material
Bore (Shaft DIA)
Polish/Finish
Passivate/Electropolish
MTR/Documents RQD
Other/Comments
Quantity

Teflon Turbine Impeller WMP-185

admin — Tue, 09 Dec 2008 18:32:36 +0000

If you are unsure of which impeller is right for you or if you would would like a quote, simply fill out form below.

Your email address must be included for us to properly assist you

You will never be put on any email or mail lists – all information is confidential between you and WMP

Your Name
Your Email
Type of Impeller
Impeller Diameter
Material
Bore (Shaft DIA)
Polish/Finish
Passivate/Electropolish
MTR/Documents RQD
Other/Comments
Quantity

Pitched 3-Blade Propeller

admin — Wed, 19 Nov 2008 22:41:35 +0000

Price – Call for available impeller packages

If you find better pricing on any comparable mixing impeller anywhere, send us the link and we will meet or beat it!

Set screws fasten propeller to shaft
Weighs 181g
low shear, high top-to-bottom (axial) pumping capacity with
high gas injection
will vortex 5 gallons of water at 3600 rpm

Pitched 3-Blade Propeller Only

Part Number: A161

set screws fasten propeller to an 8 mm (5/16″) diameter shaft

can add multiple propellers to one shaft

Shaft Only

Part Number: A162

8 mm x 400 mm

Straight Blade Teflon Coated Impellers

admin — Wed, 19 Nov 2008 22:40:05 +0000

Price – Call for available impeller packages

If you find better pricing on any comparable mixing impeller anywhere, send us the link and we will meet or beat it!

Welded to shaft
Weighs 124g
high shear with moderate vortexing characteristics
will vortex 5 gallons of water at 1200 rpm

Straight Blade Teflon Coated Impeller

Part Number: A131TF

teflon coated A131

Compact Straight Blade Impeller

Part Number: A231

compact version of the A131

length of blade is 31 mm (1 1/4″) diameter instead of 50 mm (2″)

Square Blade Teflon Coated Impellers

admin — Wed, 19 Nov 2008 22:36:27 +0000

Price – Call for available impeller packages

If you find better pricing on any comparable mixing impeller anywhere, send us the link and we will meet or beat it!

Welded to shaft
Weighs 180g
For large volumes or high viscosities; radial flow with maximum vortexing
will vortex 5 gallons of water at 450 rpm

Square Blade Teflon Coated Impeller

Part Number: A150TF

teflon coated A150

Compact Square Blade Impeller

Part Number: A250

compact version of the A150

blade is 38 mm (1 1/2″)

square instead of 70 mm (2 3/4″)